R-View Cam Addon
Parts:
1: Cam Ebay............. 35.00 (this was a Color cam with IR illuminators)
1: Handle Ford.......... 70.00
1:Wire Etc................. 20.00
Total Cost................ 125.00
(This assumes you have a Playback unit already installed. I used my Factory DVD/Nav unit.) I had my Nav unit modded to enable dual video 1: Reverse cam & 2: Aux Video.
Time to complete: +/- 2 hours.
1: Drill out the new handle to 1" (that was my cams outside measurement) file as needed.
2: Fit cam with supplied hardware (mine came with 2 jam nuts) I added some epoxy to help fit.
3: Remove the old handle and sway over the key cylinder.
4: Install the new handle.
5: Attach wires 1 Vid ---- to your playack unit, 1 ground to ground and then the red wire to you reverse lights in my truck it was the green/brown wire just under the tailgate. I attached there, and also added a manual switch .
6: pat your self on the back and go drink beer. (provided all this worked.)
|
